Friday, 17 February 2017
Monday, 13 February 2017
A&B Commercial Tire Services offer an impressive selection of tires from the best brands in the business for car, truck or SUV. Also stock a variety of specialty tires for nearly every need- industrial, commercial, OTR and farm tires. Call Us Now 440-478-1205
8032 Proctor Rd, Painsville OH, 44077
Monday, 6 February 2017
Tuesday, 31 January 2017
Keeping your tires properly inflated is one of the easiest ways to help maintain good gas mileage and extend the life of your tires. Check your car's tire pressure at least once a month with a quality gauge, that measures pressure in pounds-per square inch (psi). Three types of tire pressure gauges are available at most auto parts stores: digital, dial and pen/stick types. The digital and dial designs tend to be more accurate and easier to read, although a good pen/stick gauge will do the job as well. Pressure gauges built into air hoses at gas stations are often abused and frequently inaccurate.
Recommended tire pressures are for cold tires. Therefore, tire pressure should be checked at ambient temperature before the vehicle has been driven. Checking tire pressure on a car that has warm tires can result in a pressure reading of up to 5 psi higher than the recommended pressure. The recommended inflation pressures for your car's tires can be found in the vehicle's owner's manual or on the tire information decal attached to the driver's door jamb. On older cars the decal may be in the glove box or inside the fuel filler door.
Tuesday, 24 January 2017
The difference between 4/32" and 2/32" of tread depth might not seem like much, but based on research by the Tire Rack, America's largest independent tire tester the difference is significant. For example, a pickup truck traveling at 70 miles per hour that passes the penny test can take up to 499.5 feet to stop on wet pavement . However, the same truck has a stopping distance 122 feet shorter if it passes the quarter test instead. This is a 24 percent difference in stopping distance, and the equivalent of six or more car lengths.
The Tire Rack also reported that tires passing the quarter test exhibited better grip on the road under other driving conditions as well. Given these facts, AAA suggests you put that penny back in your piggy bank and instead use a quarter to check tire wear and determine when it is time for replacement.
Tuesday, 17 January 2017
Insert a quarter into a tread groove with the top of Washington's head facing down. If the top of his head is not visible, your tires have at least 4/32" of tread and are fine for continued use. If you can see above the top of Washington's head, it is time to start shopping for new tires. Take measurements in three locations across the tire's tread: (1)outer edge, (2) center, and (3) inside edge.
The penny test is done in the same way, except that if you can see above the top of Lincoln's head your tires have less than 2/32" of tread, which is below the legal minimum and cause for immediate replacement. Tires worn to this level will also have visible wear indicators (thin bald strips) running from side to side across two or more tread segments.
Wednesday, 11 January 2017
Tires depend on good tread condition depth to maintain traction and to shed water on wet roads. The tread should be checked at least once a month for excessive and uneven wear. The most accurate tread depth measurements are made with a simple tread depth gauge available at any parts store. Or you can use the traditional quarter and penny tests.